Ameriwood HOME 1774196COM Mode D'emploi page 22

Step 14
ameriwoodhome.com
To adjust the vertcal height.
Loosen the four screws "A" on both hinges. Two
of them are usually in slotted holes which allows
you to adjust up or down by a few milimeter. Then
tighten back up.
To adjust depth.
Loosen screw "B" and adjust door, if the door
cannot be adjusted, please loosen screw "C",
then try again. Tighten screw "B" and "C".
To adjust side ways.
Turning the screw "C" on BOTH hinges on each door.
22
* raw edges are shaded