Maintenance And Cleaning - Tristar ST-8911 Mode D'emploi

MAINTENANCE AND CLEANING

Note: Before any maintenance or cleaning
operations, please turn the temperature knob on
minimum position, unplug your steam generator
from the power socket and allow it to cool down
completely.
Empty the water tank
• Unscrew the water tank filter cap.
• Empty the boiler above a sink.
• Turn the boiler cap back on the unit.
Steam generator cleaning
• Clean the soleplate with a vinegar-water
solution.
• Clean the base and iron with a damp cloth and
dry it completely before storage.
• To not damage the soleplate, we advise you
never put the soleplate on a metal surface.
• Clean your steam generator after every 10
times of use.
All manuals and user guides at all-guides.com
Boiler cleaning
• Unscrew the boiler filter cap.
• Fill it with near of 250mL of clear water.
• Fix the boiler filter cap.
• Shake the base unit for a few moments and
• In order to obtain the best result, we
Type of water to use
• You can use normal tap water to fill the tank.
• We advise you to empty the water tank after
• Do not add anything to the contents of the
then empty it completely.
recommend to repeat this action twice.
Therefore, especially if your tap water is very
hard, we advise you to mix it with distilled
water or use distilled water only.
use in order prevent limestone inside the water
tank.
boiler and do not use water from clothes
dryers, scented or softened water, water from
refrigerators, batteries, air conditioners and rain
Steam generator iron
EN
9