Safety Instructions; Work Area Safety; Electrical Safety - Hilti TE 30 Mode D'emploi

of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
en
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level
Uncertainty for the given sound level as per EN 60745
Additional information in accordance with EN 60745
Triaxial vibration value for the TE 30 (vibration vector
sum)
Hammer drilling in concrete, a
Triaxial vibration value for the TE 30‑AVR (vibration vec-
tor sum)
Hammer drilling in concrete, a
Triaxial vibration value TE 30-C-AVR / TE 30-M-AVR)
(vibration vector sum)
Hammer drilling in concrete, a
Chiseling, a
h, HD
Uncertainty (K)
Other information about the power tool
Chuck
Drilling dia. range in concrete/masonry
(hammer drilling)
Percussion core bits
Drilling dia. range in wood: solid bits
Drilling dia. range in metal
Drilling performance in medium-hard concrete
Protection class as per EN

5 Safety instructions

5.1 General Power Tool Safety Warnings
a)
WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.

5.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
20
All manuals and user guides at all-guides.com
h, HD
h, HD
h, HD
101 dB (A)
90 dB (A)
3 dB (A)
measured in accordance with EN 60745-2-6
16.5 m/s²
measured in accordance with EN 60745-2-6
12 m/s²
measured in accordance with EN 60745-2-6
12 m/s²
11 m/s²
1.5 m/s²
TE‑C (SDS‑plus) / TE‑T (SDS Top)
5...28 mm
66...90 mm
5...20 mm
Max. 13 mm
∅ 16 mm: 75 cm³/min
Protection class II (double insulated) as perEN 60745‑1
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.

5.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any ad-
apter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.