Mark PinTherm Connect Livret Technique page 20

8.0 PinTherm Connect connections
L N
21 - 22
21 - 23
24 - 26
25 - 26
+ -
11 - 12
A - B
RJ 45 connector
13 - 14
Warning: Dangerous voltage present on N, L, 13, 14, 21, 22, 23, 24, 25 and 26
With the PinTherm Connect, only devices that comply with the safety regulations as laid down in
EN-IEC 61010-1 may be controlled.
20
MON
0
I
RESET
Connection terminals (230Vac/50Hz)
Continuous ventilation
Heating/cooling
Fault signal
Reset
0-10Vdc (Heating/cooling)
External room sensor
MODBUS RTU (R ground)
Internet / Modbus TCP/IP
Potential free contact (max. 2,5A)
PinTherm Connect
06.29.108
08:01 18ºC
DAY X:060
OK
ESC

R