Assembling/Disassembling Backrest; Vehicle Seating Positions - Harmony DREAMTIME 2 Manuel D'instructions

ASSEMBLING/DISASSEMBLING BACKREST

1. Insert 'T-Shape' plastic extensions on base of backrest
into the corresponding slots on seat base ❶.
2. Push until both insert ❷.
3. While holding fabric down at rear of seat base, slowly
swing the backrest upwards, whereby locking the
backrest into place ❸. The hook-and-loop portion
of the fabric at rear of seat should be UNDER the
backrest ❹.
3. Secure fabric ❺.
4. To remove backrest, repeat previous steps in reverse
order.

VEHICLE SEATING POSITIONS

! WARNING: IMPROPER PLACEMENT OF THE BOOSTER
SEAT INCREASES THE RISK OF SERIOUS INJURY OR
DEATH.
! In very few vehicles, the booster seat cannot be
properly installed because of the type of seat, seat
belt system and/or airbag system. ALWAYS READ AND
FOLLOW the vehicle owner's manual for booster seat
system use.
!
Use this booster seat in a vehicle rear seat location.
15
❸
❶
❷
❹
❺