Technical Data - ANSMANN ACPS-120W Mode D'emploi

> Do not overload the power supply (see
technical details)
> To clean the power supply, disconnect it
from the mains and use only a dry cloth
OPERAtiOn
1. Adjust the Output voltage switch (1) on the
bottom side of the power supply to the correct
output voltage (15-24V) using the key (2).
Detailed information about the correct voltage
and polarity can be found inside the manual of
the Notebook Computer, or on the name plate of
the original power supply.
Please note that incorrect voltage setting or
polarity can damage your Notebook Computer.
If you are unsure, do not connect with your
Computer. Consult your local dealer!
2. Connect the correct plug to the connector of
power supply (4).
3. Insert the output plug to the appliance
(Notebook Computer)
4. Connect the mains lead to the mains socket
(100–240V AC).
5. Turn on the Notebook
6. After use, remove the power supply from
the mains

tEChniCAL dAtA

Prim: 100-240V AC / 50-60Hz
Sec: 15V/16V/18V/19V/20V DC – max. 6A
22V DC – max. 5.5A
24V DC –max. 5A