WAGNER FURNO HEAT GUN F300 ELECTRONIC Manuel Du Propriétaire page 6

EN
Component Description
Features Fig. 1
1) Mode selector switch
a) 0 (OFF)
b) 1 (LOW)
c) 2 (HIGH)
2) Hanging hook
3) Handle stabilizers & cordset (removable with tool)
4) Rear stabilizer fins (stand)
Fig 1
a
6
4
1
2 3
b c
Attaching and Detaching the Cordset
The cordset (Fig. 2, 1) for the Heat Gun is delivered detached from
the gun (Fig. 2, 2). To attach, line up the cord with the socket on the
handle of the gun and press firmly together until you hear a click. The
cord set does not need to be removed. If required to detach, insert a
small flat head screwdriver (Fig. 2, 3) or, similar tool into the hole as
shown. Firmly push the screwdriver and tilt it upward (4) towards the
handle to release the cordset. Firmly pull the cordset away from the
gun.
Attaching
Fig. 2
2
1
FURNO 300
Detaching
3
4