Safety Precautions - Redmond RT-M406-E Mode D'emploi

Carefully read all instructions before operating the appliance and save them for future
reference. By carefully following these instructions you can considerably prolong the
service life of your appliance.

SAFETY PRECAUTIONS

• Manufacturer is not responsible for injuries caused
by failure to comply with the safety requirements
and operation rules of the appliance.
• This appliance is intended to be used for nonindus-
trial use in house hold and similar spheres of ap-
plication: staff kitchen areas in shops, offices and
other work ing environments, farm houses, by clients
in hotels, motels and other residential envi ronments.
Industrial application or any other misuse will be
regarded as violation of proper service conditions.
Should this happen, manufacturer is not responsible
for possible consequences.
• Before plugging in the appliance ensure that the
circuit voltage matches operating voltage of the
appliance (see technical specifications or manufac-
turer' s plate on the appliance).
4
• Use only earthed electric sockets as this is an ob-
ligatory safety requirement. Use an earthed exten-
sion cord as well.
• Use an extension cord designed for power consump-
tion of the appliance (not less than 2.5 kW) as the
parameter mismatch may result in a short circuit or
fire outbreak.
• Do not leave the product unattended while it is in
use. The appliance is not intended to be operated
by means of an external timer or separate remote-
control system.
• Do not place the product on or near a gas or electric
burner, or inside or on top of a heated oven or
other heat source.
• Do not use the product near water or other liquids.
• If the product falls into water, immediately unplug
it from the electrical outlet. Do not touch or reach
into the water.
• To avoid a circuit overload when using this product,