Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Pre-dialing
The unit has pre-dialing function, when you may enter and edit the number before dial it out.
The following procedure describes how to use this function:
1. In idle mode, enter the number you want to dial. During entering, you can press R/CLR key to correct the
number.
2. Press
key or
Redial function
1.
Press
key or
2.
Press RD/P key, the last dialed number will be dialed again.
To Lock/Unlock the keypad
To lock the keypad
Press and hold the
You will hear a beep tone, the icon
While the keypad is locked, any key you press is invalid.
To unlock the keypad
Press and hold the
You will hear a beep tone, the icon
MULTI-HANDSET OPERATION
Maximum 5 handsets can be linked to the same base unit. Maximum 4 bases can be linked to the same
handset.
If you have more than one handset registered with one base, there are some advanced functions, operation it
by the follow ways:
Intercom
The intercom feature is activated by pressing the INT key.
1.
In idle mode, press INT key once.
2.
The user will be prompted to select the number of the internal handset with which you wish to connect, press
the registered sequence number of the handset you want to call
3.
The destination handset will ring, press
any handset press
During a call, it's to transfer the call to another handset.
1.
During a phone call, press INT key once, you will be prompted to select the number of the internal handset
with which they wish to connect, press the registered sequence number of the handset you want to call
2.
The destination handset will ring. With the melody defined for an internal call.
or
3.
Press
key of the ringing handset to accept the call.
4.
The two internal handsets will be connected. To complete the transfer of the call, the initiating handset should
be placed on the cradle and the external call will now be connected to the second handset.
key once, the unit will dial out the number show on the LCD.
key.
key for about 2 seconds.
will appear on the top of display, "HS LOCKED" will appear on LCD.
key for about 2 seconds.
will disappear from the display and it will go back to idle mode.
or
key. Call transfer
key to enter conversation mode. To end intercom mode,
34
Publicité
Table des Matières
