Helo Elite Free Mode D'emploi page 22

EN
Functions/Settings buttons
Calender
Date and calendar program
Day program
In order to be able to use the Calendar
functions for the Sauna heaters, a
door switch is required for EU region,
connected to the door (part no.
11000326). It is also needed in order to
use WiFi with a sauna heater and Combi
heater.
While setting the calendar function you
can create programs for individual dates
or programs that repeat every week.
Configuration: System settings.
During Configuration there is both information
about the system and the possibility to adapt
and set various functions and parameters. It is
also possible to configure additional equipment
(such as for example fragrance pumps or extra
lighting).
When Configuration is touched, the screen shows a menu
with a number of separate sections. IN order to see more
rows, put your finger on the screen and draw it up or down.
Only the Wifi menu is described in this quickstart guide.
Overview program
In order to be able to use Wifi for the sauna and Combi
installation, a door switch must be connected.
You connect to your WLAN under the Network menu. Bear
in mind that the position where the control panel is located
affects how well it can communicate with the wireless
network. Many kinds of material disturb the wifi signal. Before
fixed installation of the control panel, check the signal strength.
To do this, start the system and go into Network. Available
networks will be displayed with a relative signal strength
indicated in % after each name. The signal strength must be at
least 60%. Otherwise a new access point or repeater must be
installed near the Elite panel. The local network must be set on
the 2.4 GHz band and only on channel 1-11.
The system supports WPA/WPA2 personal SSID+password
(max. 20 characters). In order to connect to your local network,
first activate Wifi and press Network. Then press Scan which
searches for the accessible networks. In order to connect,
press on the desired network; if a password is required press
on Password, enter the password and then press Connect. In
order to connect mobile applications or PC applications refer
to the app instructions on the TyloHelo web site (https://www.
tylohelo.com/fi/helo/sauna-control-panels).
Under Name you can name your system. A default name is
present to begin with, and this depends on the system you
have. In order to change or alter the name, press it and a
keyboard will appear for editing.
Elite Free automatically re-connects to the selected WLAN if
connection is lost. When the system is connected, the WiFi
symbol lights up on the Home screen.
22