Safety Guidelines; Features - ANFIELD AP-PTO-9 Manuel D'instruction

PTO Gear Pumps
INSTRUCTION MANUAL

SAFETY GUIDELINES

ALL HYDRAULIC PUMPS MUST BE PROPERLY INSTALLED INTO THE HYDRAULIC SYSTEM TO PREVENT
1
PERSONAL INJURY AND/OR PROPERTY DAMAGE. FURTHER, THE IMPROPER SERVICING OF A PUMP MAY
RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE. PLEASE READ AND UNDERSTAND ALL
CATALOG AND SERVICE INFORMATION BEFORE STARTING. AS WITH ALL MECHANICAL WORK THE
PROPER TOOLS, KNOWLEDGE, AND SAFETY EQUIPMENT ARE REQUIRED. ALWAYS WEAR SAFETY GLASSES.
MAKE SURE ALL PRESSURE HAS BEEN RELIEVED IN THE HYDRAULIC LINES BEFORE INSTALLING OR
2
SERVICING A HYDRAULIC PUMP.
WARNING: ESCAPING HYDRAULIC FLUID UNDER PRESSURE CAN HAVE SUFFICIENT FORCE TO PENETRATE
SKIN, CAUSING SERIOUS PERSONAL INJURY. DO NOT USE YOUR HAND TO CHECK FOR HYDRAULIC LEAKS.
BEFORE INSTALLING OR SERVICING A HYDRAULIC COMPONENT MAKE SURE ALL WEIGHT HAS BEEN
3
REMOVED FROM THE CYLINDERS OR MOTORS BEFORE DISCONNECTING HYDRAULIC LINES.
WARNING: DISCONNECTING THE HYDRAULIC LINES WHILE THE CYLINDER OR MOTOR IS UNDER LOAD MAY
RESULT IN THE UNEXPECTED RAPID MOVEMENT OF MACHINE RESULTING IN SERIOUS PERSONAL
INJURY.
4
DO NOT EXCEED THE OPERATING SPECIFICATIONS FOR PRESSURE, FLOW OR TEMPERATURE. ALL HYDRAULIC
SYSTEMS REQUIRE A MEANS TO LIMIT THE MAXIMUM PRESSURE. THIS REQUIRES EITHER A PRESSURE
RELIEF VALVE IN THE SYSTEM OR A PUMP THAT HAS PRESSURE COMPENSATION.
WARNING: OVERPRESSURE MAY CAUSE SUDDEN AND UNEXPECTED FAILURE OF A COMPONENT IN THE
HYDRAULIC SYSTEM RESULTING IN SERIOUS PERSONAL INJURY. ALWAYS USE A GAUGE WHEN ADJUSTING A
RELIEF VALVE.

FEATURES:

Reliable and Efficient
n
Roller Bearings
n
Internally splined drive shaft
n
High-tensile cast iron end plates
n
Slips onto tractor PTO shaft (no gear box required)
n
Two outlet ports are provided with a plug to seal the unused port
n
Center section is a high strength aluminum alloy for reduced weight
n
Ideal for back hoes, landscaping equipment, front end loaders, rotary mowers
n
2