Using The Bike; Riding The Bike - Greenway 8965105 Manuel D'instructions

Wheel diameter setting：
The circle marked two keys two keys at the same time long press 5 seconds to enter the wheel
diameter settings, the default speed display area flashing for the instrument default factory rotation of
the characters, 16-28 inch of any one value ), (The upper right corner of the instrument will appear
icon ), that has entered the set wheel interface, while releasing the two keys, and then through
the "plus" or "minus" key to adjust to the required value of the wheel diameter, adjustable The range
is (16-28 inch) to adjust to the required wheel diameter value, and then press the circle marked two
keys for 5 seconds until the speed display area character zero does not flash and the instrument
appears in the upper right
completed.
1×long
Speed Limitation setting：the circle marked two keys two keys while long press 5 seconds to enter
the speed limit setting, the default speed display area flashing for the instrument default factory
speed limit characters, while releasing the two keys, and then through the "plus" or "Down" key to
adjust to the required speed limit, the adjustable range is 12-40, adjust the required speed limit
value, and then press the circle marked two keys for 5 seconds until the speed display area
character zero
Do not flash after confirmation. (40 on behalf of the speed limit, 12-39 for the corresponding speed
limit)

3. Using the bike---

Before taking off, make sure that you activate the battery by pressing on the button located on
the side of battery.
Turn on the display unit which is on the handlebars. Select your needed assistance level and
start to pedal. You'll find that the engine starts as soon as you start pedaling.
When you use the brakes, the contactor located within these brakes will halt the engine's
assistance immediately.
The left brake lever controls the rear brake. The right brake lever controls the front brake.
You can also use the bike without electric assistance by turning off the battery (switch off the
button or by adjusting the assistance level on 0). The engine will then feature zero resistance:
you'll be freewheeling. Select the appropriate gear by activating the 7-speed gear lever.
corner of the icon After the disappearance of the confirmation is
Set the function 2（Speed Limitation）

Riding the bike

Speed
See the following description
Limitation
7