Accessories - WAGNER FURNO 700 Mode D'emploi

EN

Accessories

The following accessories may come with the Heat Gun or may be purchased separately by visiting www.wagner-group.com/accessories.
Alternatively see back of manual for your nearest Service Centre.
Name
Concentrator
Nozzle
P/N2366222
Wide Concentrator
Nozzle
P/N2366223
Name
5
4
1+2
3
12
Description
Directs a concentrated heat
flow to the work surface. Ideal
for removing paint in awkward
corners, crevices, mouldings,
beading or architraves.
Directs a long, narrow heat pattern
to the work surface. Ideal for
removing paint or varnish from
large, flat surfaces such as skirting
boards, doors, stairs, etc. It should
be used in conjunction with a flat
scraper.
5-in-1 Detailed
Scraper Tool
P/N2366227
Carry Case
P/N2366226
Name
Glass Protection
Nozzle
P/N2366224
Reflector Nozzle
P/N2366225
Description
This tool has 5 functions. The blade is used to (1) scrape paint and (2) spread
compound. The gouge point (3) is used to remove putty/caulk from open
cracks. The curved area (4) is used to clean roller covers. The flat side (5) can be
used to open paint tins.
The heat gun carry case with AngleLoc has been specifically designed to
locate the heat gun in the upright position for work on uneven surfaces.
FURNO 700 · FURNO 750
Description
Deflects the heat away from
glass or other fragile areas. Ideal
for window sills, ledges, frames
and skirting boards.
Disperses the heat flow evenly
around the whole work surface.
Ideal for thawing frozen pipes,
solder pipe work, bending
plastics or heat shrinking
electrical insulating tubing.