a.
Connect accessories to the control unit
Each accessory is connected to the control unit with a separate cable and connector.
Each cable is identified with a label; each cable must be connected whilst taking care to connect the label and
connectors of the same colour
b.
Connect the cables to the electricity grid
WATER CONNECTIONS
CAUTION: Carry out connections by respecting the indicated sequence
Connect the steam generator to the nozzle with pipe (A), and then connect the water supply pipe (B) to
the steam generator and pipe (C) to the drain.
KLIOS 70X90 REV.2.0M (09/05/2014)
EN
35