Electric hand mixer Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
General description Fig.A
1. Eject beater button
2. Speed selector
3. Handle
4. Motor unit
5. Beaters
Use instruction
Make sure the cord supply is not plugged in and the speed selector is on position 0.
Insert the beaters in the holes placed at the bottom of the motor unit, slightly press and turn until they are locked
into place.
Plug the cord supply into the socket.
Pour the ingredients into the container and start the mixer, placing it at the centre of the container.
Select different speed with the selector and always start with the lower speed.
When starting the preparation, make sure to the correct position of the hand mixer into the container, that could
cause splashes. When complete, turn off the hand mixer by placing the speed selector on 0, and put it on his
back to remove the beaters easier by pressing eject beaters button.
It is recommended to use the hand mixer for around first 30 second at lower speed.
Cleaning
Before cleaning the hand mixer unplug the cord supply from the socket and make sure the speed selector is on
0 position.
Remove the beaters by pressing the appropriate button .
Wash the whisks with hot water and neutral soap.
The motor unit may be cleaned with a soft cloth dampened with hot water.
Do never clean with thinners, abrasive detergent, detergent for plastic, glass or other that could damage the
hand mixer.
Do not introduce liquids into the hand mixer.
Do not immerse the motor unit into water or other liquids, do not rinse with water.
Technical data
Power: 150W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
6