Keys Operation; Freezer Temperature Control - Vitara VTFR1201EWE Instructions De L'utilisateur

5. OPERATION

Keys Operation

The keys in the display layout are referred to in the following figure:
5.1 Display and description
SET button:
LED indicator lights:
5.2 Refrigerator Temperature Controls
Your refrigerator will automatically maintain the temperature level you select. The temperature control has three
(3) settings:
COLD is the warmest setting, COLDER is the recommended setting, COLDEST is the coldest setting.
You can change the temperature setting amongst "COLD", "COLDER" and "COLDEST" by pushing the "SET" button.
At first, set the panel to the "COLDER" setting and allow 24 hours before adjusting the temperature to your needs.
The power can be switched off by pressing the "SET" button for three (3) seconds and the "OFF" indicator light will
turn on. To switch the power back on, press the "SET" button again for another three (3) seconds.

5.3 Freezer Temperature Control

Your unit has one vent control for regulating the temperature in the freezer compartment. The temperature
x
control is located on the center of the freezer compartment's interior back panel.
The first time you turn the unit on, adjust the temperature control knob to "COLDEST" and let the unit run
x
for at least two (2) hours before storing food inside. This will ensure that the freezer's cabinet is thoroughly
chilled before food is put in.
The freezer temperature control ranges from "COLD" (the warmest) to "COLDEST" (the coldest). Adjust this
x
control to get the desired temperature. The recommended setting is ''COLDER'' (halfway between "COLD"
and "COLDEST").
Press to change the refrigerator setting from 1 (cold) to 3 (coldest).
Light up to show the current refrigerator setting.
8