How To Operate - Homecraft HCSSDC1SB Manuel D'instruction

HOW TO OPERATE

Before making the first pot of coffee, wipe down the exterior of your SINGLE SERVE
COFFEE MAKER with a clean, non-abrasive cloth or sponge. Thoroughly wash
the Filter Basket and travel mug in warm, sudsy water and thoroughly dry.
Next, find a flat surface near an electrical outlet. Make sure your cord is away
from any water source, then plug coffee maker into the electrical outlet.
Finally, follow the steps using only water. This will remove any dust or residue that remains
in the system from the manufacturing process. Discard the water and repeat if necessary.
1. Open the Top Cover and fill the Water Tank with cold drinking water. This
is a single serve coffee maker, so do not fill more than what you will be
drinking out of. NOTE: The included travel mug has a 16 oz. capacity. It is
recommended to use around 10-12 oz. of water to avoid overfilling.
2. Place the reusable coffee filter into the Filter Basket, and add coffee grounds to the
coffee filter. Generally, it is recommended to use 1 tablespoon (1 Scoop) of ground
coffee per cup, but the amount used can be adjusted to your personal preference.
3. Place the coffee mug or travel mug onto the base and close the Top Cover.
4. Switch the ON/OFF switch to ON The Brew indicator light
will illuminate red and begin the brewing cycle.
5. When finished brewing, remove the Carafe to pour and serve coffee. Coffee will be kept
warm on the Warming Plate for two hours.
NOTE: The Carafe may be removed during the process of brewing and the appliance will
automatically stop dripping. DO NOT remove Carafe for more than 30 seconds at a time.
CAUTION: Freshly brewed coffee will be hot! Use care when pouring and serving coffee.
6. Turn off coffee maker by switching the ON/OFF button to OFF.
Dispose of the used coffee grounds and coffee filter.
6