Rear Panel - CARPOINT 0510350 Manuel D'utilisation

absOutlet sockets available for North America, Europe (Schuko), UK, Australia, etc.
AC Output Optional:
D. Vent Outlet
To reduce the inverter temperature.
E. USG Port: 5V, 2.1A
Powers and charges USB-enabled devices.
F. Remote Switch Port (Optional)
Use to connect the remote ON/OFF switch via a communications cable.

2.2 Rear Panel

The rear panel view shows the inverter's Cooling fan, DC Battery Terminals and Fuse.
A. Cooling fans/Ventilation Windows
The fans operate automatically when the inverter's internal temperature exceeds 45°C and requires cooling. Always allow free air flow – do
not block the vents.
B. DC Battery Terminals
Connect the inverter to a battery or other power sources.
Negative (-) and Positive (+) DC terminals should be kept insulated to protect against accidental short circuits.
a) Connect the black cable to the black post marked (-) on the back of the inverter. Connect the other end to the negative terminal on the
battery.
b) Connect the red cable to the red post marked (+) on the back of the inverter. Connect the other end to the positive terminal on the battery.
If you connect the cables to the incorrect terminals, you will reverse the polarity and damage the inverter.
REVERSE POLARITY PROHIBITED.
DAMAGE CAUSED BY REVERSE POLARITY IS NOT COVERED BY THE WARRANTY.
C. Fuse
The good design of the external fuse enables the fuse to be changed outside the inverter if the inverter fuse blows.
0510350-62i_A5.indd 3 0510350-62i_A5.indd 3 08-07-2020 08:10 08-07-2020 08:10