Removing/Installing Fabric Seat Cover - Harmony World Traveler 0303009STC Manuel D'instructions

REMOVING/INSTALLING FABRIC SEAT COVER

HEADREST:
1. Locate and undo the snaps (x2) and
unhook fabric from plastic hooks
(x2). Remove fabric headrest cover
by gently sliding fabric off each
side of the headrest.
BACKREST:
1. Locate and unhook the elastic loops (x4) and slide
fabric cover off the backrest.
BASE:
1. Locate and undo the snaps (x2) at
the top of the seat base (where
the backrest meets the base);
Locate the fabric loops at the
back/bottom of the seat base;
And locate the elastic loops (x2) at
the very front/bottom of the seat
base.
2. Gently slide fabric cover off the plastic
base from the back of the booster
seat towards the front of the seat.
TO INSTALL:
To reinstall fabric pads, repeat previous
steps in reverse order.
TIP: For ease of booster seat BASE
pad installation, tilt the backrest
forward slightly to open a gap
at base of backrest to facilitate
passing the fabric through the
gap to secure snaps.
26