Application Conditions; Setting And Operation - aquaforte IH30 Instructions D'installation

4.5 Application conditions

Ambient temperature
Salt pools
Humidity
Altitude
Suction Head
Insulation

5. SETTING AND OPERATION

5 . 1 Display on control panel:
�
�
�
5
Indoor installation, temperature range: -10< ~50<
No greater than 0.5%
≤90% RH, （20ʱ2Ê）
Not exceed 1000m above sea level
2m
Class F, IP55
①
②
③
④
⑤
�
⑥
�
�
(capacity/flow/time)
Manual-Inverter Mode
Auto-Inverter Mode:
automatically adjusted between 30%-100% according
to the preset flow rate to ensure a constant flow.
Manual-Inverter Mode:The running capacity will be
set manually between 30%-100%
The default mode is Auto-Inverter mode.
Power consumption
Running capacity / Flow rate
WIFI indicator
Unit of flow
Timer period
Timer 1/2/3/4
Backwash/unlock
Up/down:
Switch between
The running capacity will be
Timer setting
On/off
to change the
Auto-Inverter Mode
value
and