Installation And Connection - Poollux ECO style 3 Manuel D'utilisation Et De Service

2. Dimension

3. Installation and Connection

3.1 Remarks
The factory supplies the heat pump on its own. Other components,
including a by-pass where necessary, must be supplied by the user or
installation technician.
N.B.:
Please follow the steps below when installing the heat pump:
1. Any addition of chemicals must take place in the pipes located
behind the heat pump.
2. Install a by-pass if the water flow of the swimming pool pump is
more than 20% above the permitted flow through the heat
exchanger of the heat pump.
3. Install the heat pump above the surface level of the swimming
pool.
4. Always install the heat pump on a firm base and use the
damping rubbers supplied to avoid vibration and noise.
5.
Always keep the heat pump straight up. If the appliance was
held in a diagonal position, wait for at least 24 hours before
starting the heat pump.
Model ECO3
s /ECO5
A 273
B 423
C 260
D 293
E 747
F 210
G
H 470
- 3 -
Unit : mm
ECO8
/ECO10
330
680
280
360
930
230
83 83
520
ECO
12
330
655
300
360
1000
340
83
590