Using The Thermostat - Prem-I-Air EH0287 Mode D'emploi

USING THE THERMOSTAT

The thermostat can be use to regulate the room temperature.
Turn both switches on (high heat), and rotate the temperature control fully
clockwise.
The appliance will then operate at maximum output. When the desired
temperature is reached, rotate the temperature control anticlockwise until a click
is heard. The appliance will then switch on and off to keep the room at the
desired temperature. The indicator light will show that this is happening.
Either the low, medium or high heat setting can be used.
OPERATING COSTS
At time of going to press, the average cost of electricity is £0.12 per unit (kilowatt-
hour). The amount you are being charged will be shown on your electricity bill.
At this cost, the appliance will cost 10p per hour to run on the "low heat " setting,
and 14p per hour to run on the "medium heat" setting or 24p per hour to run on
the "high heat" setting, with the thermostat set to its maximum.
If the thermostat is used to regulate the temperature the operating costs will be
lower, depending on the room temperature.
4