PRODUCT SPECIFICATIONS
Collet ................................................................1/8 in. max.
No Load Speed .................... 10,000 - 35,000 r/min. (RPM)
KNOW YOUR ROTARY TOOL
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
ON/OFF SWITCH
This product has an easy access power switch located on
the top of the product.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-877-617-3501 for assistance.
PACKING LIST
Rotary Tool
Operator's Manual
FEATURES
Input ................................ 120 V, 60 Hz, AC only, 1.2 Amps
Weight ..................................................................... 1.2 lbs.
SPEED CONTROL DIAL
The speed control dial allows you to easily select tool
speed.
SPINDLE LOCK
The spindle lock allows you to secure the collet when chang-
ing accessories.
TOOL HANGER
The tool hanger provides a convenient place to hang the
rotary tool while using a flex shaft (not included).
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
Page 7 — English