Emptying The Internal Water Container - Plasma Cool PC14E Manuel D'utilisation

Emptying The Water Container
This air conditioning does not require emptying of the
water container, except prior to season end storage.
This portable AC features the
Innovative AutoDrain Technology
Very little excess water should accumulate. During the process of
cooling, some of the water accumulated is actually used to cool the
unit internally, making it run more effi ciently. Both this evaporative
technology and Innovative AutoDrain Technology are
features not found in most portable air conditioners.
Switch off the unit and remove the plug
from the outlet.
• Position a fl at container or dish on the fl oor
under the drain hole. Do not allow the water to
drip continuously into the container as it might
easily overfl ow.
• Remove the drain knob.
• Remove the rubber plug, the water will fl ow in the
container. When this is nearly full, replace the plug to
stop the water fl ow and empty it. Repeat this process
until all water has been removed.
• Replace the rubber plug into the drain hole fi rmly,
the should not fl ash any longer.
WATER FULL LED
• Replace the drain knob.
13
Rubber plug Drain knob