Forno EM034D4NA Guide D'utilisation page 10

Masquer les pouces Voir aussi pour EM034D4NA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Countertop Installation
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Installation
1.
Select a level surface that provide
enough open space for the intake
and/or outlet vents.
12 inch(30cm)
3.0 inch(7.5cm)
3.0 inch(7.5cm)
A minimum clearance of 3.0 inches
(7.5cm) is required between the oven and
any adjacent walls. One side must be open.
(1) Leave a minimum clearance of 12
inches (30cm) above the oven.
OPEN
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
(2) Blocking the intake and/or outlet openings
can damage the oven.
( ) Place the oven as far away from
3
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
2. Plug your oven into a standard household
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.
WARNING: Do not install oven over a
range cooktop or other heat-producing
appliance. If installed near or over a heat
source, the oven could be damaged and
the warranty would be void.
The accessible surface
may be hot during
operation.
EN-10

Publicité

Table des Matières
loading

Produits Connexes pour Forno EM034D4NA

Ce manuel est également adapté pour:

Fmwdr300024

Table des Matières