Installation Instructions - De Dietrich Teppan Yaki DTE1068X Guide D'installation Et D'utilisation

All manuals and user guides at all-guides.com
EN

1 / INSTALLATION INSTRUCTIONS

The appliance must be connected by an approved engineer in
accordance with the regulations in force.
The installer is responsible for the good operation of the appliance.
He must explain its operation to the user, with the aid of this
manual.
The plug must be accessible after installation.
If the supply lead is damaged, it must be replaced by an equivalent
lead (H07RNF 3x1,5mm²) available from the after-sales department.
It is also necessary to provide a bipolar cut-off device in your power
supply circuit, where the opening of the contacts is more than 3 mm.
A 16-ampere fuse is necessary.
Your teppan yaki uses 2.500 watts. It is therefore absolutely
necessary for your electric wiring system to be able to supply that
power without danger.
Your teppan yaki MUST be connected to earth.
Cooking with the teppan yakki necessarily involves the emission of
fumes. This factor will have to be taken into account when choosing
the place where your teppan yaki is to be fitted.
IT IS ABSOLUTELY IMPERATIVE TO LEAVE A SPACE OF AT
LEAST 5 CM BETWEEN THE BOTTOM OF THE TEPPAN YAKI
AND THE FIRST SHELF OF THE KITCHEN UNIT.
DO NOT STORE INFLAMMABLE GOODS IN THE SPACE
BELOW THIS APPLIANCE.
WARNING : If the teppan yaki malfunctions in any way, unplug the
appliance or remove the fuse corresponding to the sector where the
teppan yaki is hooked up.
- 13 -