Controls And Functions - mixars Serato DJ Mode D'emploi

Controls and functions

Rear
1. Power On/Off switch
Turns the power of the unit On and Off.
2. AC In
Connect the powercord here.
3. Main output, Balanced XLR
Main Balanced XLR output, controlled via the
«Master» knob (see 30).
4. Booth Output, TRS
Secondary TRS output (Bal.), controlled via the
«Booth» knob (see 31).
5. Secondary Master output, RCA
Secondary RCA Master output (Unbal.), controlled
via the «Master» knob (see 30).
6. Additional Rec. output
Additional RCA Record output (Unbal.), controlled
via the «Master» knob (see 30).
7. Secondary Line inputs
Line signal dedicated secondary input for each
channel.
8. Main Phono/Line inputs
Main Phono / Line Inputs for each channel.
Use the dedicated «Phono / Line» button nearby
for selecting the right setting depending on the
equipment used (Phono or Line sources).
9. USB Hub
2 x Extra USB Inputs for connecting various
accessories to your computer.
10. Main USB soundcard output
Connect the mixer to your computer using the
included USB cable for using it with Serato DJ.
Front
11. Mic input
XLR / TRS Combo Microphone input, controlled via
the «MIC/AUX» knob (see 25).
12. Aux input
Additional Aux input for connecting various Line
signal sources, controlled via the «MIC/AUX» knob
(see 25).
13. Mic / Aux switch
Select if Using the Mic Input (switch towards left)
or the Aux input (switch towards right)
Center position turns the Mic/Aux Input off.
14. Channel Fader Curve Adjustment and
Reverse switch
Adjust the Channel fader curve characteristics for
the corresponding channel and enable or disable
Reverse for each channel.
15. Crossfader adjustment and reverse switch
Cf Cut-In:
Personalize your Cut. Adjust the Cut-In time for the
crossfader. Turn towards left for minumum dead
space - faster cut, and towards right for a larger
dead space – slower/longer cut-in.
Cf Curve:
Adjust the Crossfader curve from Hard (towards
right) to Soft (towards left).
Reverse switch:
Reverses the Left with the Right Channel.
16. Headphones output
TRS and Mini-Jack Headphones output controlled
via the «Headphones» knob (see 29).
17. Split Cue On/Off switch
If enabled, the headphones signal gets split:
Master signal on one channel, and the enabled Cue
signals selected via the «CUE» buttons (see 32),
on the other channel.
EN 3