Harbor Freight Tools PACIFIC HYDROSTAR 95672 Instructions D'assemblage Et Mode D'emploi page 20

Be cERTAIn to shut off the Pressure Washer, release all pressure in a safe manner, and
disconnect it from power and water before adjusting, cleaning, or repairing the unit.
cOnnEcTIOnS
ARE LOOSE
Retighten
connections.
clean tip, using a Tip
cleaner (not included).
nOn-PRESSURE
WASHER DETERgEnT
USED
Empty the Detergent
container and rinse it
out thoroughly. Refill
detergent.
with correct
Ensure that the suction
tube is not bent or
pinched.
If the steps above do not solve the problem or if the repairs involved are too
SKU 95672 For technical questions, please call 1-800-444-3353.
All manuals and user guides at all-guides.com
Troubleshooting
IMPORTAnT!
Pressure changes during use
Air may be getting in the water supply
hose, check all connections.
TIP IS
DIRTY
Detergent will not dispense
Verify that proper type of pressure
washer detergent is being used.
LAncE SET TO LOW
PRESSURE
complex, contact a qualified technician.
(continued)
ALL cOnnEcTIOnS
ARE TIgHT
check that tip is free from
debris and deposits.
Internal valves or seals may
be worn or sticking, contact
a qualified technician.
cORREcT DETERgEnT
USED
check the setting of the
Adjustable Lance (33).
LAncE SET TO HIgH
Pull out on end of lance to
set to Low Pressure and try
again.
TIP IS
cLEAn
PRESSURE
PAGE 20