Switching On; Display - LEGRAND 035 82 Notice D'installation

1 - Introduction

1.8 - Switching on

After installing the Tuner (or after a power cut) and if no device has requested switching on the
radio, with backlighting OFF, the display shows "MY HOME" and the indication "STANDBY".
The Radio Tuner has a display with backlighting, which comes on when any of the pushbuttons
is pressed. One minute after the last press the backlighting and the LED go out. Activating the
device by means of the commands on the front of the tuner does not involve switching on the
amplifiers in the rooms.

1.9 - Display

The display shows the message RDS sent from the tuned station (only if available from the radio
stations), the tuned frequency and the number of the station played.
There are also two indications "STEREO" and "FM CH" which indicate if the tuned signal is stereo
and if automatic station search has been selected.
Stereo signal
indication
18
All manuals and user guides at all-guides.com
The RDS message and the tuned frequency
alternate on the display
RDS Message
Indication of Number of the
automatic search station saved
mode
Frequency tuned