Initial Operation And Setting; Switching On And Off; Clear Button; Reference Level Setting(See "Figure D") - BizLine BIZ 790 394 Mode D'emploi

3. Initial Operation and Setting

3-1. Switching On and Off

3-2. Clear Button

If in
button

3-3. Reference Level Setting(See "Figure D")

Press this button
special beep sounds whenever the reference setting is changed.
After a re startup the reference returns automatically to the default
setting(rear reference).
Figure D
3-4. Display Illumination
on or off, user can trigger the function when he/she is in darkness
situation. The value is clear visible on the LCD.
e_Notice_BIZ 790394_v2.indd 5
Switches on the instrument and laser.
Press this button longer to switch off the instrument.
The instrument switches off automatically after three minutes of
inactivity.
The last action is cancelled or the data display is cleared.
the mode of History storage, press Storage button and Clear
simultaneously will clear all storage data in the memory.
The default reference setting is from the rear of the instrument.
to take the selection from the front edge, A
Click illumination/UNITS button of the display can be switched
EN
5
20/05/2019 17:4