Telestar TROTTY PUMP Mode D'emploi page 17

The digital display shows the real-time pressure value during
inflation.
Attention: The compressor is really noisy during operation. The
hose heats up during inflation process and may not be touched
E
with bare hands.
5.8 Stop inflation
5.9 LED flashlight
Press and hold the U/LED key (see chapter 3, m), to switch the
LED flashlight on/off.
5.10 Measuring pressure
After switching on, please connect the compressor to the
devices to be inflated. The display will automatically show the
current pressure value.
5.11Clearing pressure value
After switching on, the pressure display may be reset by pres-
sing and holding the +/- key for 3 seconds, if the display shows
another value except „0".
17