INVENTOR R2-ION8L Manuel D'utilisateur page 13

2. Continuous draining
Water can be automatically emptied into a floor
drain by attaching the unit with a water hose.
• Remove the water tank and attach the drain hose
to a suitable drainage facility. Make sure the hose is
attached securely to avoid any leaks and place it as
deep as possible to ensure the right drainage.
• Place the end of the hose into the drain and make
sure that the water flows naturally. For correct drai-
nage, make sure the hose stays below the level of the
drain hose outlet.
When the continuous drainage feature is not being used,
remove the drain hose from the drain hose outlet.
EN
All manuals and user guides at all-guides.com
Water
drain hose
outlet
x
13