Maintenance And Care - Würth ISS 35 Traduction Des Instructions De Service D'origine

Automatic filter cleaning
ISS 35-S automatic, ISS 55 automatic, ISS
55-S automatic only:
The appliance has an innovative filter cleaning sys-
tem that is particularly effective with fine dust. The
flat pleated filter is automatically cleaned every 15
seconds through an air jet (pulsating sound).
Note: Automatic filter dedusting is switched on at
the factory.
Note: The automatic filter dedusting function can
only be switched on/ off when the appliance is
switched on.
To switch off automatic filter cleaning:
–
 Activate the switch. Indicator lamp in the
switch goes off.
To switch on automatic filter cleaning:
–
 Press the switch again. Indicator lamp in the
switch glows green.
Turn off the appliance
 Switch off the appliance at the main switch.
 Pull out the mains plug.
After each operation
 Empty the container.
 Vacuum and wipe the appliance inside and
outside with a damp cloth.
Storing the Appliance
Illustration
 Store the suction hose and the mains cable as
shown in the illustration.
 Place the appliance in a dry room and secure
it from unauthorized use.
Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you trans-
port it.
 Remove the suction pipe with the floor nozzle
from the holder. Hold the appliance at the han-
dle and at the suction pipe to transport it.
16
All manuals and user guides at all-guides.com
 When transporting in vehicles, secure the ap-
Caution
Risk of injury and damage! Note the
weight of the appliance in case of stor-
age.
This appliance must only be stored in interior
rooms.
First pull out the plug from the mains be-
fore carrying out any tasks on the ma-
chine.
Caution
Keep the device and the ventilation lou-
vres clean in order to be able to work
well and safely.
–
–
 Open filter door.
 Replace the flat pleated filter.
 Close the filter door, it must lock into place.
 Release and remove the suction head.
 Clean the electrodes with a brush.
 Insert and lock the suction head.
4
pliance according to the guidelines from slip-
ping and tipping over.
Storage

Maintenance and care

Danger
If the vacuum cleaner should fail inspite of thor-
ough manufacturing and testing procedures,
have the repair performed by a Würth master-
Service centre.
Please indicate the part number taken from the
type plate of the vacuum cleaner in case of
questions or spare parts orders.
Exchanging the flat pleated filter
Cleaning the electrodes