Footrest Adjustment; Maintenance And Cleaning - Gross anex Manuel D'entretien

you have to do is pull it toward yourself until you hear three
distinctive clicks in intermediate positions.
The portable cradle features an additional handle for easy
carrying (fig. 18). The portable cradle features a feet cover,
which is placed on in its forepart and secured with a zipper
and buttons on both sides (fig. 19). The portable cradle's
hood can be ventilated by unfastening a zipper at the bottom
part of the hood and bending it down (fig. 20). The stroller
has an insect protection which is suitable both for cradle
and seat unit (fig. 21). The stroller has a rain protection which
is suitable both for cradle and seat unit (fig. 23, 24). The
cradle is ventilated (fig.22). Turn the lever counterclockwise
to open the ventilation and clockwise to close it (fig. 22).
SEAT UNIT MOUNTING / DISMOUNTING
To mount the seat unit, place its adapters into the adapter
pockets located on the frame's inner side (fig.25). The seat
unit adapters are blocked automatically.To dismount the
seat unit, press the buttons of the seat unit adapters, while
lifting it up (fig. 25). The seat unit's backrest can be adjusted
to the desired height using the adjuster located on the seat
backside (fig. 26).
SEAT UNIT HOOD, FEET COVER
The seat unit features a conveniently foldable hood
protecting a child from wind, sun, snow and rain elements.
The hood position is adjusted by pressing on its top (fig. 27).
The seat unit features a feet cover, which is secured with
buttons on both sides in this stroller's forepart (fig. 28). The
seat unit's hood can be ventilated by unfastening a zipper on
the roof and untucking the bottom part (fig. 28).

FOOTREST ADJUSTMENT

For adjusting to the desired height, simultaneously press
the buttons located in front of each other on both sides
of the footrest (fig. 29).
SEAT UNIT'S SECURITY BARRIER
Every seat unit features a security barrier with a protective
mechanism preventing a child from getting out of this stroller.
Simultaneously press the red buttons, placed in parallel on
both sides of the handle, set a comfortable height for your
baby (fig. 30). For dismounting the security barrier, press the
buttons and gently pull the handle up (fig. 31). For mounting
the security barrier, insert it into the latching mechanisms
located on both sides of the seat unit (fig. 31).
SAFETY BELTS
The seat unit features 5-point safety belts. To secure
a child with protective belts, insert the safety belt locks
into the grabber and tighten those belts (fig. 32). You can
also adjust the length of the safety belts. If you need to
unfasten them, press the buttons and remove the clips
from the buckle (fig. 32).
CHILD SAFETY SEAT
The child safety seat can be mounted on the stroller's
frame as well. It must be attached to tailor-made adapters
(fig. 33). To secure the removable child safety seat, insert the
adapters into the adapter pockets on the frame (fig. 33), then
secure it (fig. 34). The adapters are blocked automatically.
To remove adapters press the button on the inner side
(fig. 35).The child safety seat equipped with a feet cover
fastened with buttons to the body of a child safety seat
(fig. 34); it has child safety belts as well. To remove child
safety seat from a frame press buttons on both sides of
a seat simultaneously (fig. 36). Our safety seats can be
mounted in a car both with a standard car seat belts or
ISOFIX locking system.
Before using the child safety seat, read the instructions
carefully.
INSTALLING ADDITIONAL
ACCESSORIES ON THE FRAME
The frame is equipped with a special fastening system
for the branded cup holder TM Anex. Additionally, the
stroller features a shopping bag and a bag for mom.
You can also install additional hooks and accessories
on the stroller's handle.

MAINTENANCE AND CLEANING

Make sure this stroller always stays dry and clean
(both its upholstery and its frame). There's no need to
remove the stroller's upholstery. This stroller's upholstery
can be cleaned with a damp sponge or a cloth using a
detergent.
EN