Visonic TYCO KP-241 PG2 Guide De Démarrage Rapide page 3

KP-241 PowerG wireless portable keypad
Quick reference guide
Table 2. Quick reference guide
Feature Description
Arms the system to protect the site perimeter. Movement within the interior does not
Arm Home
trigger an alarm.
Arm Away Arms the system when you vacate the protected site.
Arms the system without the need to provide a user code.
Quick Arm Home
Note: Enable Quick Arm on the control panel to use this function.
Arms the system without the need to provide a user code.
Quick Arm Away
Note: Enable Quick Arm on the control panel to use this function.
Arms away and enables an automatic latchkey message to one or more designated
phone numbers, or to the user app, when a latchkey user disarms the system. For
Latchkey Arm
example, parents can use this feature to receive a notification when a child has returned
home and disarmed the system. You can assign latchkey users to users 5 to 8.
Use this feature to skip the entry delay time period after you arm the system.
Instant Arm
A detection in any zone will trigger an immediate alarm.
Disarm Restores the system to the standby state.
Disarming under Initiates a silent alarm if you need to disarm the system under duress.
duress The system disarms normally, but a silent alarm transmits to the monitoring station.
Emergency alarm Initiates an emergency alarm.
Fire alarm Initiates a fire alarm.
Panic alarm Initiates a panic alarm.
Use the partition feature to arm and disarm up to three controllable areas.
Partitions
Note: Enable partitioning on the control panel to use this feature.
Function button Activates the function set by the installer.
D-307871 KP-241 PG2 Quick Start Guide
Command
Press the Arm Home button and enter your user code or
present your tag.
Press the Arm Away button and enter your user code or
present your tag.
Press and hold the Arm Home button for two seconds.
Press and hold the Arm Away button for two seconds.
Press the Arm Away button three times.
Press the Arm Home or Arm Away button, enter your user
code or present your tag, and then press the Arm Instant
button.
Press the Disarm button and enter your user code or
present your tag.
Press the Disarm button and enter the duress code. The
default duress code is 2580.
Press and hold the Emergency button for two seconds.
Press and hold the Fire button for two seconds.
Press and hold both the Emergency and Fire buttons for
two seconds.
Press Partition buttons 1, 2 or 3 to select a partition before
arming or disarming the system.
Press the Function button.
3