GARDY SHELTER EKO 504040 Notice De Montage page 34

ENGLISH
CODES PART DESIGNATION
A Front lower board
B Back board
H1 Lower half side board
Start the assembly with the 4 lower boards: the two front/back lower boards (part A, B) and
the first two side boards (part H1) with the pegs facing up. Assemble them to form the base
frame.
It is best to use a rubber mallet and especially a mounting wedge to assemble the boards.
Place the mounting wedge on the tongue of the board and hit it with the mallet until the
board is completely in place.
The concrete slab must be perfectly straight. You can easily check it with the spirit level.
DIMENSIONS (MM)
40 x 95 x 4980 mm
40 x 95 x 4980 mm
40 x 48 x 3980 mm
QTY
1
20
2
34