How To Maintain; Regulatory Compliance Information - Xiaomi Mi Air Purifier 2S Mode D'emploi

How to Maintain

Make sure to turn off the air purifier and disconnect power before cleaning.
Clean the filter cartridge
To ensure optimum operation,
use a vacuum cleaner or soft
cloth to remove any dust clinging
to air holes or housing walls.
Clean the laser dust sensor
The switch of dust sensor's
back cover is at the top of the
filter housing. Lift to open the
back cover (see Figure A).
Use an air blow gun or hair
dryer to clean the back cover
grille and sensor (see Figure B).
Note: Do not use hot air .
Figure A
Figure B
7
Specifications
Name Mi Air Purifier 2S Rated voltage
Model AC-M4-AA Rated frequency
Item dimensions 240×240×520 mm Rated power
Net weight approx. 4.5kg Noise level
Effective coverage 21 - 37m 2 PM filtering efficiency
Wireless
Wi-Fi IEEE 802.11 b/g/n 2.4GHz
connectivity

Regulatory compliance information

Europe — EU declaration of conformity
We Beijing Smartmi electronic technology limited, hereby, declares that this equipment
is in compliance with the applicable directives and european norms, and amendments.
The full text of the EU declaration of conformity is available at the following internet
address: https://www.mi.com/en/service/support/declaration.html
Disposal and recycling information
Correct disposal of this product. This marking indicates that this product should not be
disposal with other household wastes. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
100-240V~ PM CADR 310m
50/60Hz PM CCM P3
29W Formaldehyde CADR 60m
≤66dB(A) Formaldehyde CCM F3
Formaldehyde
High High
filtering efficiency
Network standby power consumption < 2.0W
8
3
/h
3
/h