How To Install - Xiaomi Mi Air Purifier 2S Mode D'emploi

Display
The front screen displays instructions
025
25 60
Temperature
℃ %
Humidity
Note: the air purifier automatically adjusts the display brightness based on ambient light.
PM 2.5 readings
Mode
Auto: automatically switches mode
according to indoor air quality
Night: low-noise mode for a quiet
night's sleep
Manual: adjusts filtering efficiency
by setting coverage via Mi Home App
Wi-Fi status
Air quality indicator
The air quality indicator turns green,
yellow or red to indicate current air quality
Green 0-75 μg/m³
Orange 76-150 μg/m³
Red 150 μg/m³ or higher
3

How to Install

Open the filter door Take out the power cord
1 2
Press to open filter door and Remove the power cord from
make sure the filter is installed the bag within the cartridge and
in place. close the filter door.
Connect to power supply
3
Connect the power cord to the
connector at the bottom of the
unit, then plug it into a power
supply.
4