Samsung Brada BFW36W Manuel D'utilisation page 21

For any codes not listed above, call 1-800-360-2742
BFW36W-02463D-01_EN.indd 21
Temperature sensor problem.
High current detected.
High/Low voltage detected.
Vibration sensor problem.
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
SUdS codes will blink in turn.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service, see below
To prevent it, cut down on detergents.
Troubleshooting _21
2008-04-11 ¿ÀÈÄ 8:18:21