Connector Pin Assignment; Temperature Sensors; Flow Sensor - Zenner multidata WR3 Manuel De Montage Et D'utilisation

All manuals and user guides at all-guides.com
Español Italiano

Connector pin assignment

Temperature sensors

2-wire measurement:
Supply 1 – 2
Return 3 – 4

Flow sensor

pulse: 10
GND: 11
Input/Output
I/O 1: pulse: 52
GND: 53
M-Bus RS-232
L1: 24 DTR: 71
L2: 25 GND: 72
Tx: 73
Rx: 74
Depending on the meter's model the version of the connection board
can differ. If water meters with a potential free reed contact are con-
nected to the inputs the connection can be made in any direction. Take
care of the polarity when connecting to a BMS. The connectors 24/25
are given twice for the incoming and outgoing of the M-bus wire.
2 4
Switch
Connection 2-wire
Connection 4-wire
4-wire measurement (optionally):
Supply 1 – 2 / 5 – 6
Return 3 – 4 / 7 – 8
I/O 2: pulse:
GND:
RS-485
+UB: 71
GND: 72
A: 73
B: 74
1 2 3 4 10 11 9 50 51 52 53 54 55
54
55
71 72 73 74
19