Purchased Parts Package; Technical Data Multidata Wr3 - Zenner multidata WR3 Manuel De Montage Et D'utilisation

All manuals and user guides at all-guides.com
Español Italiano
Be sure to read the installation
and operating manual before ins-
talling. This allows you to protect
yourself and prevent damage.

Purchased parts package

■
Calculator multidata WR3
■
Seal material
■
Wall holder with mounting accessories
■
Installation and operating manual

Technical Data Multidata WR3

Temperature range
Temperature difference
Display
Display unit
Interface flow sensor
Temperature sensor
connection
Max. cable length 2-wire
Max. cable length 4-wire
Interface
Ambient temperature
Power supply
Battery lifetime
Protection class
Mechanical/electro-mag-
netic class
Accuracy class
Measuring cycle dynamic
(*) Possibility for battery replacement is depending on the country, please check the relevant
national regulations
Check the contents of the packa-
ge before installation to be com-
plete.
°C 0 - 150
k 3 - 120
Multifunctional LCD, 8-digit, floating
MWh, kWh, GJ, MJ
Models with contac pulsers or active pulser
(no Namur or Opto),
passive max. 1 Hz/ active max. 100 Hz
PT500, optional PT100, PT1000
12,5m (PT500),
m 2,5m (PT100),
20m (PT1000)
m 20m
optical, optionally: M-Bus,
remote readout outputs
°C 5 - 55
3,6 V Lithium battery; extern with M-Bus,
optionally power supply (230V/24V)
>6 years, optionally >11 years
(changeable during the operation) (*)
IP 54 / IP 65, according to DIN 40050
M1 / E1
according to EN1434
40s / 30s / 10s
17