5. Installation and use
5.1 Safety instructions
DANGER ELECTRIC SHOCK!
Don' t let the power supply cord touch hot parts
-
Don't let the power supply cord along a table or a counter
-
-
The appliance must be connected with a single-phase socket in conformity.
-
Before any installation check all the electric cables or piping
WARNING !
Operating your appliance can reach very high temperature. To avoid injuries and
burns do not use the appliance if it is damaged. Do no use spare parts not
provided with your appliance
DANGER ELECTRIC SHOCK !
In the event of bad installation, the appliance can be dangerous and cause injuries. The
electrical safety of this appliance is ensured only if it is correctly connected to an
efficiently earthed system in accordance with electrical safety regulations. The
appliance must be unpacked entirely before the connection.
5.2 Installation and use
WARNING !
Installation and maintenance must be only carried out by qualified technician.
Never let your appliance operating without supervision.
Always operate with dry hands.
Operating never move or tilt your appliance.
Operating instructions :
- Remove all protective foils and packaging material prior to usage.
- Place the appliance on a flat, solid, and heat-resistant surface. Never install your -
appliance on inflammable surface.
-Do not install the appliance near fireplaces or all hot sources.
-The plug must be protected by a circuit breaker of 16 A. Connect the appliance directly
21