Maintenance And Cleaning - Würth BS 14-A Power Traduction Des Instructions De Service D'origine

All manuals and user guides at all-guides.com
OBJ_BUCH-1566-001.book Page 15 Monday, November 21, 2011 8:31 AM

Maintenance and Cleaning

❏ For safe and proper working, always keep
the machine and ventilation slots clean.
Clean the application tool, the tool holder, the power
tool's ventilations slots, and the battery's ventilation
slots each time after using.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by a Würth master-Service.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the machine.
The current spare parts list for this power tool can be
viewed in the Internet under
"http://www.wuerth.com/partsmanager"
or be requested from your next Würth branch office.
Guarantee
For this Würth power tool, we provide a guarantee in
accordance with the legal/country-specific regula-
tions from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will
be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth power tools.
Transport
The contained lithium-ion batteries are subject to the
Dangerous Goods Legislation requirements. The user
can transport the batteries by road without further
requirements.
When being transported by third parties (e.g.: air
transport or forwarding agency), special requirements
on packaging and labelling must be observed. For
preparation of the item being shipped, consulting an
expert for hazardous material is required.
Dispatch batteries only when the housing is undam-
aged. Tape or mask off open contacts and pack up
the battery in such a manner that it cannot move
around in the packaging.
Please also observe possibly more detailed national
regulations.
Disposal
The machine, rechargeable batteries, accesso-
ries and packaging should be sorted for envi-
ronmental-friendly recycling.
Do not dispose of power tools and batteries/
rechargeable batteries into household waste!
Only for EC countries:
According to the European Guideline
2002/96/EC, power tools that are no
longer usable, and according to the Euro-
pean Guideline 2006/66/EC, defective or
used battery packs/batteries, must be col-
lected separately and disposed of in an environmen-
tally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the instructions in
section "Transport", page 15.
Subject to change without notice.
15