Publicité
How To Safely And Best Use Your Wireless Charger Pad
• If you're using an accessory with your phone case, for example a Mous Card Wallet, please remove it as it may affect the charge
performance
• Limitless 3.0 contains magnets to allow perfect fast charging every time. Ensure magnets snap to position otherwise your mobile
device may not charge properly
• Ensure there are no metallic objects between the charging pad and your phone as this may interfere with the wireless charging
• For best charging performance, we recommend you use the Mous supplied adapter and cable
• For best results, use a Limitless 3.0 case on your mobile device
• If you are not using a Limitless 3.0 case your phone won't align into place - you will need to ensure your phone is as central as
possible to get the most efficient charge
LED Indication Key
• White LED flashes twice: correct power has been plugged into the board
• Solid white light: product is connected to charger
• No light: product on standby
• Constant flashing white LED light: input voltage instability/voltage stringing between circuits
• We recommend you unplug your charger
• Make sure you're using the Mous adapter that came with your wireless charger
• If there's still a problem when using the Mous adapter please contact us
• Flashing red LED light: over voltage/low voltage/over current/over temperature/foreign object detection/circuit failure
• Please check for foreign objects and remove if found
• If this doesn't solve the problem, unplug your charger and contact us
Important Safety Instructions - Warning
Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess
heat, toxic fumes, fire or explosion, for which damages you ("Purchaser"), and not Mous Products Ltd. ("Manufacturer") are
responsible.
X Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat,
as this may reduce charge efficiency or reduce lifespan of the product.
X Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high heat may cause explosion.
X This product is fitted with magnets. Pacemaker and ICD users are advised not to position the Limitless 3.0 Wireless Charger
within 20 cm radius of their implanted device as it may cause interference.
X Do not expose the Wireless Charger to water. Exposure to water may result in short circuiting. If short circuiting occurs
immediately turn off at the wall.
X Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or
injury to persons.
X Do not disassemble this product or attempt to repurpose or modify it in any manner.
X Do not attempt to replace any part of this device. Any modification or disassemblement may result in a void of warranty.
X Use of a power supply or charger not recommended by Mous may result in a risk of fire or injury to persons.
X If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing
supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or
damages arising from unintended use or misuse by a minor.
X All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is
emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all
product use and contact Manufacturer.
X Switch off the wireless charger when not in use.
X To disconnect the charging pad from line voltage, pull the AC adapter from the AC outlet.
X To comply with FCC RF exposure compliance requirements, the wireless charger must be used with a separation distance of at
least 20 cm from all persons.
Publicité
