Publicité
Les langues disponibles
Les langues disponibles
CONNECTING MODULES (CONTINUED)
FIGURE B
NOTE: Additinoal modules are not provided and are
shown only for reference.
INSTALLING MODULES INTO YOUR MPR RACEWAY
NOTE:
• All module ground wires must be connected to the facility ground and bonded to the ground stud in the
J-Box.
• Generic modules are shown and may not excactly match specific products.
1. Carefully insert the module into your raceway as shown. (FIGURE C)
M-PCON-20A
120V/240V - 20A - 60Hz
Conforms to UL Std
5 & 5A
Certified to CSA Std
C22.2 No. 62 & C22.2 No. 62. 1
FIGURE D
3. Use #1 Phillips screwdriver and one of the provided screws
to attach the module to your raceway. Do not overtighten.
(FIGURE E)
WARRANTY
For warranty information, refer to
http://www.middleatlantic.com/company/about-us.aspx#warranty
Corporate Headquarters
Voice: 973-839-1011 - Fax: 973-839-1976 - International Voice: +1 973-839-8821 -
Fax: +1 973-839-4982 - www.middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice: 613-836-2501 - Fax: 613-836-2690 - ca.middleatlantic.com -
customerservicecanada@middleatlantic.ca
Middle Atlantic EMEA Technical Support
Voice: +31 (0) 495 726002 - av.emea.middleatlantic.support@legrand.com
Factory Distribution
United States: New Jersey, California, Illinois - Canada: Ontario - The Netherlands: Weert
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
20 AMP MODULE
2. Slide the module into place
on your raceway and then
DO NOT CONNECT
OR DISCONNECT
position as desired.
UNDER LOAD
(FIGURE D)
TIP: For easy cable management, connect the cables
on multiple modules as shown. (FIGURE B)
3. Install the module into your MPR raceway as
explained in the following topic.
Page 6
FIGURE C
FIGURE E
Publicité
