Warning Symbols - Kensington OfficeAssist A6000 Manuel D'utilisation

English
autofeed technology
The OfficeAssist™ A6000 has been designed to automatically shred up to 600 sheets from the auto-
feed chamber and up to 9/10 sheets through the manual feed slot. The auto-feed mechanism has
been designed to handle paper fastened with staples and paper clips and to only pull a few sheets of
paper into the cutting mechanism to minimise the risk of paper jams.
To guard against injury, the following basic safety precautions must be observed in the set-up of this
product.
• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not
likely to trip up a passer by.
• Any attempt to repair this unit by unqualified personnel will invalidate the warranty. Please return to
supplier.
• Unplug your shredder before moving it or when it is not in use for an extended period of time.
• Care should be taken when moving equipment to avoid any unlevel surfaces or items on the
floor.
• Do NOT operate with a damaged power supply cord or plug, after it malfunctions, or after it has
been damaged in any manner.
• Lock casters in place, if lock provided.
• Do NOT overload electrical outlets beyond capacity as this can result in fire or electrical shock.
• The socket-outlet should be installed near the equipment and shall be easily accessible.
• Do NOT alter the attachment plug. The plug is configured for the appropriate electrical supply.
• Do NOT use near water.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
• Do NOT load the auto-feed chamber with unopened junk mail, magazines, bound documents etc.
Although this shredder has been designed to comply with UL 62368 – EN 62368 safety standards
including the "probe accessibility tests", do not operate the shredder near children or pets.
Keep power cord away from casters.
Casters can damage the power cord. If power cord insulation is damaged,
disconnect the plug from the wall socket.
6

warning symbols

Safety First
This means you should be careful
because long hair can become
entangled in the cutting head.
This means be careful of ties and
other loose clothing which could
become entangled in the cutting
head.
This means be careful of loose
jewellery which could become
entangeld in the cutting head.
This means don't reach into the
feed opening of the cutting head.
Sharp edges; do not touch
cutters.
control panel and indicators
Reverse
Jam Free indicator – This alerts
U
C
the user when too much paper is
fed into the manual feed slot (see
section on Jam Free Technology).
Paper Loading Door/Bin Door
Open or Bin Full indicator –
This means either:
• Loading door is open
• Bin is open
• Bin is full
Lock indicator – This means the
paper loading door is locked (during
shredding).
Oil level indicator
This means keep children away
from shredder.
This means no aerosols.
Sheet capacity of manual feed
10
entry slot.
This means the shredder can
accept small staples.
This means the shredder can
accept small paperclips.
This means no oil lubrication.
Unplug shredder when not in use
for extended periods of time.
Auto Continuous Jam Boost
Paper jam indicator – This means
there is a paper jam in the auto feed
chamber.
If this symbol is flashing the
shredder is attempting to clear a
paper jam automatically.
If this symbol is permanently
illuminated red please follow the
instructions under 'Rare Occasion
of Jamming'.
Oiling in Operation indicator
Loading Door Locking
Mechanism – PIN Password
Buttons – Enter a four digit code
to lock the loading door during
shredding.
O F F I C E A S S I S T A 6 0 0 0 S H R E D D E R S
™
English
7