Operation with external switch: (fig. 13B). When the external switch is turned on, the fan is boosted. After
the external switch is turned off, the fan continues to run at boost speed for a settable period of time, then it
returns to selected trickle speed (or to "comfort boost" speed in case automatic humidistat operation is on).
The front cover LED indicates when the external switch is on.
The over-run timer function is activated only if the external switch has been on for at least 60 seconds.
INSTALLATION TYPE SETTING
Installation type can be selected using JUMPER 1 between the following options: through wall or ducted
(fig. 15).
TRICKLE SPEED SETTING
Trickle speed can be selected using JUMPER (fig. 15).
DISPOSAL AND RECYCLING
Information on disposal of units at the end of life.
This product complies with EU Directive 2002/96/EC.
The symbol of the crossed-out dustbin indicates that this product must be collected separately from
other waste at the end of its life. The user must, therefore, dispose of the product in question at suitable
electronic and electro-technical waste disposal collection centres, or else send the product back to
the retailer when purchasing a new, equivalent type device.
Separate collection of decommissioned equipment for recycling, treatment and environmentally
compatible disposal helps to prevent negative effects on the environment and on health and promotes
the recycling of the materials that make up the equipment.
Improper disposal of the product by the user may result in administrative sanctions as provided by
law.
7