User Interface - Tekmar Net 2 Thermostat 530 Guide D'installation Rapide

6. Close Thermostat

7. User Interface

8. Critical Settings
The following settings are essential to the successful operation of the system.
Important Note: Set switch setting #3 and tekmarNet
Access level to Installer. Return to Lock setting once installation has been completed.
Press
+
Both
A Watts Water Technologies Company
pivot
tab
• Press and hold down both the
to change from one step to the next.
• Release both buttons once the step has been reached.
• Press the
available.
• Press and hold down both the
seconds to go to the next step, OR
• After 10 seconds of no button activity, the display goes
back to normal operation.
Mode button
Auto, Heat, Cool, Off
Fan button
Switch between Auto or On
system control to Unlock to change
®
or the button to change the setting, if
3
and buttons for 2 seconds
and buttons for 2
© 2014 530_Q - 02/14