1byone OEU00-0751 Manuel D'instructions page 6

EN TROUBLE SHOOTING
If you have followed the instructions and are having difficulty when operating the
DE
turntable, please locate the PROBLEM in the left column below. Check the corre-
FR
sponding POSSIBLE CAUSE AND SOLUTION column to locate and fix the problem.
ES
IT
PROBLEM POSSIBLE CAUSE AND SOLUTION
Ensure that the turntable is powered on
Check the master volume is not turned to minimum
No power
Remove the power adapter/connection cable and
reconnect again after 2 minutes.
Ensure the turntable is on the correct source.
The protective needle cover was not removed. Remove
No sound on it first.
The tie-wrap was not removed from underneath the
phono source
tone arm. Remove it first.
Tone arm LOCKING CLAMP was not released. Release it
first.
The stylus is dirty. Remove dust on the stylus with a
Poor sound on
stylus-cleaning brush.
phono source
Dust or dirt has collected on the record. Clean the
record with a high-quality record cleaner.
Ensure the turntable is on correct source.
Check that the turntable is powered on.
No sound on
Check the volume level on the external device.
audio out
Check the correct source is selected on the
external device.
Remove the audio cable and reconnect again.
08
SPECIFICATIONS
SPECIFICATIONS
AC adapter
Record speed
Power output at Phono
Power output at USB
Bluetooth specification
Specifications and functions connected to the continual improvement of the device
are subject to change without notice.
The appliance's packaging is made from environmentally friendly
material and can be disposed of at your local recycling plant.
AC Input = 100-240V 50/60Hz
DC Output = 12V 500mA
33, 45, 78 RPM
0.3W x2 RMS power output
1.8W x2 RMS power output
Version 5.0
09
EN
DE
FR
ES
IT