Technical Data; Safety Devices; Standard Accessories - Felisatti T770 Instructions De Service

2.1

TECHNICAL DATA

MODEL
Tension and current
Frequency (Hz)
Absorbed power (W)
Idling speed (r.p.m.)
Cut at 90°/crop (AxB fig. 2) mm
Cut at 90°/butt (AxB fig. 3) mm
Cut at 45°/crop (AxB fig. 4) mm
Cut at 45°/butt (AxB fig. 5) mm
Cut at 90°/blade at 45°
(AxB fig. 6) mm
Cut on upper surface mm
Upper surface dimensions mm
Blade diameter mm
Blade hole diameter mm
Weight (Kg)
Overall dimensions (LxHxW) mm
Sound pressure emited Lpa dB(A)
Sound power emited Lwa dB(A)
Vibration level m/s
2
* Reliefes enforced by the norms: EN 61029.1 - EN 61029.2.9 - EN 61029.2.11
2.2

SAFETY DEVICES

- When in the rest position the blade is completely
protected by two fixed casings and a mobile one which
automatically opens when the blade unit is lowered
during cutting.
- On the upper surface the blade is protected by a casing
which is lifted by the piece during the cutting approach
phase.
CAUTION - To ensure operator safety, do not remove
the above-mentioned protective casings.
- When the circular saw is used, another protective
casing should be inserted to close the lower zone.
- If the lock button has not been engaged, the blade start
release switch ensures automatic shutdown as soon
as the handgrip is released.
CAUTION - Engaging the lock button disables the safety
device provided by the manufacturer and enables push-
button start. We recommend that this device be used with
maximum caution.
The tool has been designed and constructed to permit
operation in all situations and in absolute safety.
In particular working conditions remember to use
protective gloves and safety goggles.
The tool has been designed and constructed to reduce
noise to minimum levels. (See technical data 2.1).
In particular working conditions the maximum sound
level at the place of work may exceed 85 dBA. In this
case the operator must use ear protectors.
All manuals and user guides at all-guides.com
T 771 T 770
230V-7A 230V-7A
50-60 50-60
1500 1500
4300 4300
70x150 70x150
110x47 110x47
70x85 70x85
110x47 110x47
47x150 47x150
// 45
// 264x385
250 250
20 20
11 13
84 92*
97 105*
<2.5(2,2) 6,2*
Work carefully and maintain the tool in perfect working
order, for your own safety.
2.3
This range of mitre saws is supplied complete with the
following accessories:
Clamp: ( model T777CE-T778CE ):(fig.23) gives a safer
grip on bars and sections, avoiding vibrations.
End stroke shafts for upper surface: (fig.25) allows cuts
or notches to be made at a precise, constant distance.
The equipment of series can change depending of version
applied of actual commercial situation.
2.4
For special working conditions the following accessories
are available on request:
- End-stroke shafts: (fig. 13) necessary for cutting
- Clamp (fig.28-29) gives a safer grip on bars and
- Fold-away, portable ST43, universal mitre saw
- Support and roller unit (B fig. 30) for protruding work
- Suction unit (C, fig.15) with connection pipe and
- Pusher: for cutting small pieces on the upper surface
- Goniometer support for upper surface: in this
- Work surface extension (C - fig. 30).
10
T 778 T 777
230V-7A 230V-7A
50-60 50-60
1500 1500
4300 4300
70x150 70x150
110x47 110x47
70x85 70x85
110x47 110x47
47x150 47x150
// 45
// 264x385
250 250
20 20
11 13
460x450x300
84 92*
97 105*
<2.5(2,2) 6,2*

STANDARD ACCESSORIES

ACCESSORIES AVAILABLE ON REQUEST.
beams of the same length.
sections avoiding vibrations, also suitable for small
work piece cutting.
support (A fig.30).
pieces.
union.
(fig.31).
manner angled cuts can be performed even on the
upper surface (fig.12).
T 778 CE T 777 CE
230V-8A 230V-8A
50-60 50-60
1700 1700
2000-4000 2000-4000
70x150 70x150
110x47 110x47
70x85 70x85
110x47 110x47
47x150 47x150
// 45
// 264x385
250 250
20 20
11 13
84,6 93*
97,6 106*
2,5 8*